Feuling Reaper 525 Conversion Cams Camshaft Harley Softail Touring Dyna 99-06

For 99-06 Twin Cam (except 06 Dyna) 525 CAMS – A real workhorse, designed to increase torque band width and increase fuel economy. Great bolt in camshaft upgrade for stock 88 & 96 engines also performs very well in 103 strokers. Produces strong low and mid range power with a linear horsepower and torque curve. Can be used with factory valve springs, pushrods and lifters. Increases throttle response and eases starting. Will also respond well to increased compression and cylinder head work. RPM 1,750 – 5,500 UPDATE YOUR OLD MECHANICAL STYLE CAMS AND TENSIONERS TO THE NEW HYDRAULIC STYLE TENSIONER SYSTEM Conversion camshafts for 99-06 Twin Cam engines utilize the 99-06 inner cam journals with the 07-16 outer cam journals allowing the use of the 07-16 camplates, oil pump, hydraulic chain tensioners and chain drive system. 1 FEULING #8061 HD # 25675-06 Outer chain Qty. 1 FEULING #8060 HD # 25683-06 Inner chain Qty. 1 FEULING #1091 HD # 25673-06 Outer crank sprocket 17 tooth Qty. 1 FEULING #1092 HD # 25728-06 Outer cam sprocket 34 tooth Qty. 1 FEULING #8075 HD # 39968-06 Outer hydraulic tensioner unit Qty. 1 FEULING #8076 HD # 39969-06 Inner hydraulic tensioner unit 1 – Bolt kit (2 – 1/4-20 x 3/4) (2 – 1/4-20 x 1-1/4) Qty. 1 FEULING #8041 Spacer kit Includes the following note installation requires qty. 2 of the following spacers, NOTE: correct spacer thickness is a must for proper sprocket alignment 1-# 25729-06 Thrust washer – front cam. 100 1- # 25731-06 Spacer. 110 for cam alignment; use as required 1 – #25734-06 Spacer. 120 for cam alignment; use as required 1 – #25736-06 Spacer. 130 for cam alignment; use as required 1 – #25737-06 Spacer. 140 for cam alignment; use as required 1 – #25738-06 Spacer. 150 for cam alignment; use as required NOTE: 99-01 engines with Magneti Marelli ignition requires use of Andrews sprocket #216015 in replacement of HD 34 tooth sprocket #25728-06 in order to install the new style outer cam chain FITS: TC 99 – 06, Except 06 Dyna models, 525 Intake, 535 Exhaust, requires 07-17 factory tensioners, outer sprockets, chains and hardware, can be used with factory valve springs, pushrods and lifters. RPM 1,750-5,800. This item is in the category “eBay Motors\Parts & Accessories\Motorcycle & Scooter Parts & Accessories\Engines & Engine Parts\Other Engine Parts”. The seller is “americanclassicmotors” and is located in this country: US. This item can be shipped worldwide.

• Brand: Feuling
• Manufacturer Part Number: 1016